![]() The PoE screen displays information about PoE power consumption and provides access to PoE scheduling and configuration options. Power over Ethernet (PoE) systems pass electric power along with Ethernet cables and allow a single cable to provide both a data connection and electric power to devices such as wireless access points, cameras, or VoIP phones. Maximum Frame Size Controls the maximum frame size allowed for the port Importantįlow Control cannot be enabled when the port speed is set to 100Mbps FDX. When the port speed is fixed, Flow Control automatically matches that speed.When the port speed is set to auto, the maximum speed is advertised to the link partner.Setting Description State Controls the status of the port Speed Controls the maximum speed that the port can use Flow Control Controls the status of flow control on the port Go to Configuration > Ports > Port Configuration.You can also remove user-configured network settings and monitor the network settings of the switch. The basic network configuration of the switch includes port management, VLAN configuration, configuration of various protocols, and traffic management via Quality of Service (QoS) and Access Control Lists (ACLs). This section describes how to use the QSS network settings to configure the switch. Wake later Sends a WoL command to the device on a scheduled date. Configuration Description Wake now Sends a WoL command to the device immediately. Identify a previously connected device. ![]() You can remotely power up sleeping devices by sending specially coded network packets to devices equipped and enabled to respond to these coded packets. WoL allows network administrators to perform maintenance on connected devices even if the device is powered down. This screen provides access to all the connected devices and access to Wake-on-LAN (WoL) commands. The MAC History screen displays information about devices connected to the switch. Add and configure various network settings.For details, see Switch Access.įor details, see Configuring Connection Settings.įor details, see Configuring Port Settings. The default administrator account is admin. Log in to the switch as an administrator.Default Username Default Password admin The MAC address of the switch image omitting any punctuation and capitalizing any letters. The QSS login screen opens in the default web browser. Locate the switch in the list, and then double-click the name or IP address.Qfinder Pro automatically searches for all QNAP devices on the network.Install Qfinder Pro on a computer that is connected to the same network as the switch.It is also printed on a sticker on the device as “MAC”. You can find the MAC address using Qfinder Pro. Tipįor example, if the MAC address is 00:0a:0b:0c:00:01, the default password is 000A0B0C0001. Default Username Default Password admin The MAC address of the switch image omits any punctuation and capitalizes any letters. Specify the default username and password.Type the IP address of the switch in the address bar.Verify that your computer is connected to the same network as the switch.Note: If you do not know the IP address of the switch, can locate it using Qfinder Pro. You can access the switch using any computer on the network if you know its IP address and the login credentials of a valid user account. Computer that is connected to the same network as the switch.The utility supports Windows, macOS, Linux, and Chrome OS.įor details, see Accessing the Switch Using Qfinder Pro. Web browser Qfinder Pro Qfinder Pro is a desktop utility that enables you to locate and access QNAP devices on a specific network.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |